|
|
APPLICATION & INSTALLATION INSTRUCTIONS
CREATIVE METAL TILES are a revolutionary product that integrates premium metals with proprietary polymers and ceramics to provide the rich look of solid metal at a fraction of the weight and cost. The following information is provided to assist you in knowing our product better CREATIVE METAL TILES are individually cast and polished with the care that comes from one-of-a-kind craftsmanship. Surface markings and variations are inherent qualities of the process and add to the beauty and richness of the Metals.
APPLICATIONS CREATIVE METAL TILES and trims are recommended for use in both exterior and interior, vertical applications including kitchen back splashes, bathroom & shower walls, desk & counter surrounds, fireplace surrounds, and feature walls. You can use decorative trim in combination with ceramic tiles, natural stone, fabric, wood paneling, or paint. CREATIVE METAL wall tiles & trims are appropriate as wall coverings in any residential structure and in commercial structures with approved sprinkler systems. NOTE: CREATIVE METAL wall tiles & trims are not suitable for flooring and counter tops as the clearcoat will scratch,but can be used as an edging boarder on the floor up to 18" from the wall and as a bullnose edge on counter tops.
A NOTE ABOUT THE TILE SURFACE CREATIVE METAL TILES are a true 1/32" thick metal veneer cast in a mold process with a resin backing. Each piece of CREATIVE METAL wall and trim tiles are coated to protect the natural metal surface from its natural aging and patina. Our clear coat has UV protections and a special additive for more scratch resistance. When using with ceramic tile, follow the normal installation instructions for ceramic tile. Take careful note of the following recommendations specific to CREATIVE METAL wall tiles and trims.
SETTING MATERIALS For best results, use a premium thinset portland cement mortar with liquid latex admixture conforming to ANSI A118.4 or a water-cleanable epoxy mortar conforming to ANSi A118.3, depending upon the requirements of the application.
SETTING METHODS Follow adhesive manufacturer’s instructions for preparation, mixing, application, and clean-up. Sore CREATIVE METAL tiles & trims in original packaging at room temperature until ready for use. Do not stack tiles on top of each other or lay tiles face down. Trowel a layer of mortar on the back of each tile prior to placing on the combed mortar bed to obtain 100% coverage.
GROUTING MATERIALS Always use an unsanded (dry) latex-portland cement grout conforming to ANSI A 118.6, or a water-cleanable grouting epoxy conforming to ANSI A118.3, suitable for the area of use.
GROUTING METHOD Follow rout manufacturer’s instructions for preparation, mixing, application, and clean-up. First tape off all surface areas of metal tiles to avoid getting grout into tile relief. This is very important in the installation process. Use a clean, firm rubber float. DO NOT use abrasive cleaners, powders, scouring pads, steel wool, sandpaper, etc. to remove grout haze or damage to the tiles will result.
CARE & MAINTENANCE CREATIVE METAL wall & trim tiles will easily maintain their rich appearance with simple routine care. Generally, cleaning with a damp cloth or sponge and solutions of warm water and dishwashing detergent is sufficient. All purpose, liquid, non-abrasive cleaners also work well. Rinse with clean water and wipe dry with a soft cloth. DO NOT USE SCOURING PADS, STEEL WOOL, SANDPAPER, SCOTCH-BRITE PADS, ETC. Avoid cleaners containing ammonia, bleach any other chemicals and do not use any abrasives. Always test in a small inconspicuous area when using a new cleaner to ensure compatibility.
|
